NSN 5305-00-544-7243
High Torque Screw
Primer coat applied to head.
Manufacturer part number 3MFRA584-31T for national stock number 5305005447243.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-544-7243.
-
MPN or Model
3MFRA584-31T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 2.390 inches and 2.437 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.502 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.928 inches and 1.948 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4130 -
Material Specification
Mil-s-6758 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl c federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-045-2968 MPN 53-83601-1Camera Window Defo Duct Assembly
- 1560-00-088-9774 MPN 32-321106-1Panel Seal Assy
- 5905-00-122-8574 MPN 5M932N1A752Nonprecision Nonwire Wound Variable Resistor
- 1560-00-137-9006 MPN 32-23010-3Fin Rudder Upper Hinge Fitting
- 1560-00-234-0646 MPN 32-32467-115Aircraft Skin
- 1680-00-237-9113 MPN 53-60251-53Panel Glare Shield Assembly
- 1560-00-261-6031 MPN 68A325964-1004Plenum Duct Elbow Assembly
- 5930-00-333-1177 MPN ST5M1394-002ASensitive Switch
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-544-7243 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3MFRA584-31T | Boeing Company, The |