NSN 5305-00-550-1607
High Torque Screw
Primer coat applied to head.
Manufacturer part number 3MFRA584-32T for national stock number 5305005501607.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-550-1607.
-
MPN or Model
3MFRA584-32T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 2.453 inches and 2.500 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.502 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4130 -
Material Specification
Mil-s-6758 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl c federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-008-8525 MPN 53-50016-5Csd Done Assembly
- 1560-00-009-0898 MPN 53-111011-2Aircraft Spar
- 1560-00-038-5069 MPN 53G73301-17Aircraft Pylon
- 1560-00-084-3804 MPN 32-17022-304Aircraft Trailing Edge
- 1560-00-088-1841 MPN 32-21116-7Aircraft Skin
- 1560-00-107-2371 MPN 32-11435-17Spar Spacer
- 1560-00-140-6601 MPN 32-32379-14Airframe Beam
- 1560-00-197-3727 MPN 32-311674-21Canopy Water Diverter
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-550-1607 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3MFRA584-32T | Boeing Company, The |