NSN 5305-00-551-6443
Bolt Stove
1.250 inches fastener length, flat countersunk head style, between 0.447 inches and 0.507 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number NAS514P428-20 for national stock number 5305005516443.
Datasheet
-
Product description
Machine Screw NSN 5305-00-551-6443.
-
MPN or Model
NAS514P428-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.250 inches -
Fastener Length
1.250 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.447 inches and 0.507 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
Between 26.0 rockwell c and 32.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 8630 -
Screw Material Specification
Mil-s-6050 military specification single material response or an-s-9 military standard single material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-447-9983 MPN NAS1063Terminal Board Marker Strip
- 5940-01-451-3293 MPN NAS1063E1-100HTerminal Board Marker Strip
- 5935-01-608-5882 MPN 3181-12NAElectrical Connector Cover
- 1680-00-226-0555 MPN NAS303-25-5133Arrestin Cable Assy
- 5305-00-007-0288 MPN NAS1191E08T7Socket Head Cap Screw
- 5305-00-007-6187 MPN NAS1100E08-32Machine Screw
- 5305-00-008-3701 MPN NAS1122-9Close Tolerance Screw
- 5305-00-145-0960 MPN MS35206-338Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-551-6443 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS514P428-20 | National Aerospace Standards |