NSN 5305-00-559-9064
High Torque Screw
Between 1.187 inches and 1.234 inches fastener length, flat countersunk head style, between 0.752 inches and 0.762 inches head diameter, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number NAS336CPA11 for national stock number 5305005599064.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-559-9064.
-
MPN or Model
NAS336CPA11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.615 inches and 0.682 inches -
Fastener Length
Between 1.187 inches and 1.234 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.752 inches and 0.762 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.375 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-357-3664 MPN NAS1063A14-12Terminal Board Marker Strip
- 5940-01-417-7501 MPN NAS1063B1-11Terminal Board Marker Strip
- 5940-01-384-5279 MPN NAS1063F1-1Terminal Board Marker Strip
- 5940-01-655-3766 MPN NAS1389-8Conductor Splice
- 5940-01-447-2944 MPN NAS1063A3-504ALTerminal Board Marker Strip
- 5940-01-386-5141 MPN NAS1063A12-1Terminal Board Marker Strip
- 5305-00-008-5899 MPN NAS1191-06P10LMachine Screw
- 5305-00-038-2431 MPN NAS514P632-22BMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-559-9064 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS336CPA11 | National Aerospace Standards |