NSN 5305-00-576-8073
High Torque Screw
Between 2.515 inches and 2.562 inches fastener length, flat countersunk head style, between 1.135 inches and 1.145 inches head diameter, grip diameter: between 0.5607 inches and 0.5616 inches .
Manufacturer part number NAS339CP23 for national stock number 5305005768073.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-576-8073.
-
MPN or Model
NAS339CP23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.880 inches and 0.947 inches -
Fastener Length
Between 2.515 inches and 2.562 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.135 inches and 1.145 inches -
Grip Diameter
Between 0.5607 inches and 0.5616 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.562 inches -
Grip Length
Between 1.615 inches and 1.635 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.281 inches first hole -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification all treatment responses -
Thread Series Designator
Unf -
Specification Data
80205-nas339 professional/industrial association standard
More from these suppliers
- 5935-00-779-8222 MPN NAS1196-13Electrical Connector Shell
- 5940-01-348-5473 MPN NAS1063C12-3Terminal Board
- 5940-01-470-3342 MPN NAS1063A6-510BDTerminal Board Marker Strip
- 1560-01-594-5017 MPN NAS1919C04-05PAircraft Stiffener
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5305-00-057-0527 MPN NASM51958Machine Screw
- 5305-00-068-0542 MPN MS24678-7CSocket Head Cap Screw
- 5305-00-089-0268 MPN NAS1352-04-8PSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-576-8073 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS339CP23 | National Aerospace Standards |
NAS339CP23 | National Aerospace Standards |
NAS339CP23 | National Aerospace Standards |