NSN 5305-00-579-1266
High Torque Screw
Between 2.437 inches and 2.484 inches fastener length, flat countersunk head style, between 0.752 inches and 0.762 inches head diameter, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number NAS336CP23 for national stock number 5305005791266.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-579-1266.
-
MPN or Model
NAS336CP23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.558 inches -
Fastener Length
Between 2.437 inches and 2.484 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.752 inches and 0.762 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.375 inches -
Grip Length
1.812 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.250 inches first hole -
Surface Finish
32.0 microinches top of head -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas336 professional/industrial association standard
More from these suppliers
- 5940-01-135-7077 MPN NAS1744-7Conductor Splice
- 5940-01-455-2469 MPN NAS1063C5-540BTerminal Board Marker Strip
- 5940-01-451-4414 MPN NAS1063A20-500BBTerminal Board Marker Strip
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5305-00-068-5398 MPN NAS1351C3H6Socket Head Cap Screw
- 5305-00-081-1737 MPN NAS514P1032-8PMachine Screw
- 5305-00-205-3919 MPN NAS1218-3E6Machine Screw
- 5305-00-207-8737 MPN NAS336PA17Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-579-1266 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS336CP23 | National Aerospace Standards |