NSN 5305-00-582-0157
Bolt Stove
Between 0.281 inches and 0.312 inches fastener length, round head style, between 0.193 inches and 0.211 inches head diameter, head height: between 0.075 inches and 0.086 inches .
Manufacturer part number P66569P66570 for national stock number 5305005820157.
Datasheet
-
Product description
Machine Screw NSN 5305-00-582-0157.
-
MPN or Model
P66569P66570
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.262 inches and 0.312 inches -
Fastener Length
Between 0.281 inches and 0.312 inches -
Head Style
Round -
Head Diameter
Between 0.193 inches and 0.211 inches -
Head Height
Between 0.075 inches and 0.086 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Min. Tensile Strength (psi)
60000 pounds per square inch -
Screw Material
Steel -
Screw Material Specification
Qq-s-633 federal specification single material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416 type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unc -
Nondefinitive Specification/std Data
1 type and 1s style
More from these suppliers
- 5950-00-031-0631 MPN 2050597-1Radio Frequency Coil
- 5905-00-087-6961 MPN 900258-959Noninductive Wire Wound Fixed Resistor
- 5905-00-189-8848 MPN 912113-370Noninductive Wire Wound Fixed Resistor
- 5905-00-197-0723 MPN 912113-345Noninductive Wire Wound Fixed Resistor
- 5935-00-257-9879 MPN 900285-0037-000Electrical Receptacle Connector
- 5935-00-258-1757 MPN 900285-0016-000Electrical Connector Shell
- 5940-00-351-3303 MPN 134286-0008Feedthru Terminal
- 5950-00-406-6415 MPN 905390-3Reactor
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-582-0157 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
P66569P66570 | Harris Corporation |
G14RC4CB5 | Northrop Grumman Systems Corporation |
P66569P66570 | Itt Industries Inc |