NSN 5305-00-584-6903
High Torque Screw
Between 1.002 inches and 1.015 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1894 inches .
Manufacturer part number NAS333PA10 for national stock number 5305005846903.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-584-6903.
-
MPN or Model
NAS333PA10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.380 inches and 0.447 inches -
Fastener Length
Between 1.002 inches and 1.015 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-013-7692 MPN NAS1405-14Machine Screw
- 5305-00-045-7943 MPN MS35198-5Machine Screw
- 5305-00-051-0839 MPN MS51957-98Machine Screw
- 5305-00-054-0019 MPN NAS1352C08H12Socket Head Cap Screw
- 5305-00-058-9381 MPN MS51977-53Setscrew
- 5305-00-059-4579 MPN NAS1133-6Close Tolerance Screw
- 5305-00-104-5080 MPN NAS1352-7LE36PSocket Head Cap Screw
- 5305-00-126-5146 MPN MS27039DD0814Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-584-6903 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS333PA10 | National Aerospace Standards |
NAS333PA10 | National Aerospace Standards |
NAS333PA10 | National Aerospace Standards |