NSN 5305-00-584-8278
Bolt Stove
Between 0.953 inches and 0.997 inches fastener length, flat countersunk head style, between 0.327 inches and 0.385 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN509C10R15 for national stock number 5305005848278.
Datasheet
-
Product description
Machine Screw NSN 5305-00-584-8278.
-
MPN or Model
AN509C10R15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.468 inches and 0.482 inches -
Fastener Length
Between 0.953 inches and 0.997 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.327 inches and 0.385 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
85000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Stainless steel -
Screw Material Specification
66 federal standard single material response -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-149-3231 MPN AN3102A16-9SElectrical Receptacle Connector
- 5935-00-201-8411 MPN AN3102E32-7PElectrical Receptacle Connector
- 5935-00-283-3394 MPN AN3057-12BElectrical Connector Cable Clamp
- 5935-00-500-9858 MPN AN3108B36-6SElectrical Plug Connector
- 5935-00-665-4136 MPN AN3108B10S2SElectrical Plug Connector
- 5305-00-156-2590 MPN AN510-416R18Machine Screw
- 5305-00-282-4851 MPN AN507-440-8Machine Screw
- 5305-00-680-7556 MPN AN507-1024-6Socket Head Cap Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-584-8278 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN509C10R15 | Aeronautical Standards Group |
AN509C10R15 | Aeronautical Standards Group |