NSN 5305-00-584-8798
Bolt Stove
Between 0.615 inches and 0.635 inches fastener length, flat chamfer head style, between 0.389 inches and 0.414 inches head diameter, head height: between 0.256 inches and 0.276 inches .
Manufacturer part number AN115859 for national stock number 5305005848798.
Datasheet
-
Product description
Machine Screw NSN 5305-00-584-8798.
-
MPN or Model
AN115859
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.535 inches and 0.635 inches -
Fastener Length
Between 0.615 inches and 0.635 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.389 inches and 0.414 inches -
Head Height
Between 0.256 inches and 0.276 inches -
Hole Diameter
0.070 inches -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Hole Quantity
2 -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
Between 26.0 rockwell c and 32.0 rockwell c -
Screw Material
Steel comp 8740 -
Screw Material Specification
Ams 6322 assn standard single material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Ams 2400 assn standard single treatment response -
Head Hole Configuration Style
Round -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-173-7879 MPN AN3106B36-10SElectrical Plug Connector
- 5905-00-283-5847 MPN AN3155-50-100Nonprecision Wire Wound Variable Resistor
- 5930-01-250-0440 MPN AN3217-1Sensitive Switch
- 5935-01-259-4771 MPN AN3100A28-2PElectrical Receptacle Connector
- 6110-00-997-6055 MPN AN3206-1Voltage Regulator
- 5305-00-151-0335 MPN AN501-6-5Machine Screw
- 5305-00-151-3245 MPN AN507Machine Screw
- 5305-00-151-3736 MPN AN520-1-4Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-584-8798 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN115859 | Aeronautical Standards Group |
AN115859 | Aeronautical Standards Group |