NSN 5305-00-604-0440
High Torque Screw
Between 5.578 inches and 5.625 inches fastener length, flat countersunk head style, between 0.880 inches and 0.890 inches head diameter, grip diameter: between 0.4358 inches and 0.4367 inches .
Manufacturer part number NAS337CFA54 for national stock number 5305006040440.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-604-0440.
-
MPN or Model
NAS337CFA54
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.630 inches and 0.697 inches -
Fastener Length
Between 5.578 inches and 5.625 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.880 inches and 0.890 inches -
Grip Diameter
Between 0.4358 inches and 0.4367 inches -
Single Shear Strength
14300 pounds per square inch -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.437 inches -
Grip Length
Between 4.928 inches and 4.948 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
16000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2 class 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas337 professional/industrial association standard
More from these suppliers
- 5940-00-045-8693 MPN NAS709T1Stud Terminal
- 5930-00-681-4897 MPN MS25224-2Switch Guard
- 5940-01-510-2783 MPN NAS1063C3Terminal Board Cover
- 5305-00-054-5660 MPN MS24677-122Socket Head Cap Screw
- 5305-00-059-8251 MPN MS35214-26Machine Screw
- 5305-00-090-4097 MPN MS21125-0514Close Tolerance Screw
- 5305-00-114-1905 MPN NAS1352-10LE44PSocket Head Cap Screw
- 5305-00-114-1977 MPN MS27039-5-11Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-604-0440 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS337CFA54 | National Aerospace Standards |