NSN 5305-00-605-0821
High Torque Screw
Between 1.808 inches and 1.838 inches fastener length, flat countersunk head style, between 0.531 inches and 0.558 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number C387H5-22 for national stock number 5305006050821.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-605-0821.
-
MPN or Model
C387H5-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.423 inches and 0.473 inches -
Fastener Length
Between 1.808 inches and 1.838 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.531 inches and 0.558 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 45.0 degrees and 75.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams2416 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-088-2262 MPN 12B10653-3Door Latch Link Assembly
- 1560-00-104-0611 MPN 12B40830-811Aircraft Fuel Tank
- 5935-00-113-9257 MPN C158-28-21SElectrical Plug Connector
- 5985-00-139-8227 MPN 583Z4607Antenna Support Group
- 1560-00-478-3973 MPN 12T050-855Aircraft Tip
- 5930-00-495-4637 MPN C4530-2Sensitive Switch
- 5950-00-509-1092 MPN ACW1008-1Filter Inductor
- 5905-00-552-5487 MPN C7281-505Nonprecision Nonwire Wound Variable Resistor
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-605-0821 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C387H5-22 | Lockheed Martin Corporation |