NSN 5305-00-606-9469
High Torque Screw
Retaining element in shank.
Manufacturer part number NASM 21125 for national stock number 5305006069469.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-606-9469.
-
MPN or Model
NASM 21125
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 3.043 inches and 3.063 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.126 inches and 0.141 inches -
Grip Diameter
Between 0.2487 inches and 0.2942 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 2.625 inches and 2.641 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.948 inches and 2.968 inches first hole -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 630 -
Material Specification
Ams 5643 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-535-6802 MPN CA17247-6-7-3 Two Lug Receptacle
- 5305-00-293-5096 MPN CA2901-3-7PPanel Screw Assembly
- 5305-00-467-0339 MPN CA3069-20SScrew Assembly
- 5305-00-840-5962 MPN CA1170-04-9Externally Relieved Body Screw
- 5305-00-865-8758 MPN CA2820-9SPanel Screw Assembly
- 5305-00-887-1414 MPN CA2820-7SPanel Screw Assembly
- 5305-01-046-8074 MPN CA30012-0605Panel Screw Assembly
- 5305-01-531-1662 MPN CA2290-10-15-16Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-606-9469 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NASM 21125 | National Aerospace Standards |
AS116-04-42 | Avibank Mfg., Inc. |
MS21125-0442 | National Aerospace Standards |
MS21125-0442 | Military Standards |
CA2652-04-42 | Arconic Global Fasteners & Rings, |
AS116-04-42 | Avibank Mfg., Inc. |
CA2652-04-42 | Arconic Global Fasteners & Rings, |