NSN 5305-00-606-9526
High Torque Screw
Retaining element in shank.
Manufacturer part number MS21125-0610 for national stock number 5305006069526.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-606-9526.
-
MPN or Model
MS21125-0610
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.352 inches and 0.403 inches -
Fastener Length
Between 1.164 inches and 1.184 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.722 inches and 0.740 inches -
Head Height
Between 0.189 inches and 0.204 inches -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.625 inches and 0.641 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.036 inches and 1.056 inches first hole -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 630 -
Material Specification
Ams 5643 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-528-5397 MPN CA35888-0AAir Subs Hole Liner
- 5305-00-457-7217 MPN CA11020-3-6-10PSpecial Screw
- 5305-01-177-0879 MPN CA3051-8PPanel Screw Assembly
- 5305-01-537-0986 MPN CA2252-M6-20.5Panel Screw Assembly
- 5935-00-478-1021 MPN NAS1650R12B10SElectrical Receptacle Connector
- 5940-01-425-6514 MPN NAS1063A5-447Terminal Board Marker Strip
- 5940-01-425-7387 MPN NAS1063C8-319Terminal Board Marker Strip
- 5305-00-003-6823 MPN NAS6002U24Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-606-9526 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21125-0610 | National Aerospace Standards |
MS21125-0610 | Military Standards |
CA2652-06-10 | Arconic Global Fasteners & Rings, |
CA2652-06-10 | Arconic Global Fasteners & Rings, |