NSN 5305-00-606-9527
High Torque Screw
Retaining element in shank.
Manufacturer part number MS21125-0665 for national stock number 5305006069527.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-606-9527.
-
MPN or Model
MS21125-0665
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.352 inches and 0.403 inches -
Fastener Length
Between 4.601 inches and 4.621 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.722 inches and 0.740 inches -
Head Height
Between 0.189 inches and 0.204 inches -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches and 0.116 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 4.062 inches and 4.078 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.473 inches and 4.493 inches first hole -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 630 -
Material Specification
Ams 5643 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-409-4480 MPN CA29040-06-2-5SMachine Screw
- 5940-00-833-5836 MPN NAS1063A2-705Terminal Board Marker Strip
- 5940-01-314-4635 MPN NAS1387-5Conductor Splice
- 5940-01-429-1231 MPN NAS1063B41-50Terminal Board Marker Strip
- 1680-01-541-9615 MPN NAS312C26-1192Control Cable Assembly
- 5940-01-451-4408 MPN NAS1063A10-105BXTerminal Board Marker Strip
- 5305-00-007-0285 MPN NAS1100E3-6PMachine Screw
- 5305-00-009-0521 MPN NAS1102C04-4PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-606-9527 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21125-0665 | National Aerospace Standards |
MS21125-0665 | Military Standards |
CA2652-06-65 | Arconic Global Fasteners & Rings, |
CA2652-06-65 | Arconic Global Fasteners & Rings, |