NSN 5305-00-610-5798
High Torque Screw
Unthreaded shank has solid film lubricant.
Manufacturer part number 417AS117 for national stock number 5305006105798.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-610-5798.
-
MPN or Model
417AS117
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.532 inches and 0.592 inches -
Fastener Length
Between 2.708 inches and 2.728 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.469 inches and 0.477 inches -
Grip Diameter
Between 0.2470 inches and 0.2480 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 2.116 inches and 2.196 inches -
Width Across Flats
Between 0.157 inches and 0.159 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
200000 pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Steel comp 4140 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2 cl3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-069-2170 MPN 2641216-97Electrical Plug Connector
- 5930-00-216-7338 MPN 392AS214-3Rotary Switch
- 5935-00-847-9683 MPN X704AS6936Connector Adapter
- 5950-00-893-3288 MPN 67A30A617Pulse Transformer
- 5935-01-028-3359 MPN 1571183Electrical Plug Connector
- 5940-01-074-2086 MPN 642AS4212-6Stud Terminal
- 5935-01-088-6882 MPN 810AS885Electrical Plug Connector
- 5950-01-149-2531 MPN 1214AS321Radio Frequency Coil
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-610-5798 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
417AS117 | Naval Air Systems Command |