NSN 5305-00-614-0714
High Torque Screw
Between 1.203 inches and 1.250 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3112 inches and 0.3117 inches .
Manufacturer part number NAS335-11 for national stock number 5305006140714.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-614-0714.
-
MPN or Model
NAS335-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.505 inches and 0.572 inches -
Fastener Length
Between 1.203 inches and 1.250 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3112 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Internal Drive Style
Hexagon -
Thread Diameter
0.312 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Width Across Flats
Between 0.188 inches and 0.190 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.037 inches first hole and 1.057 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Thread Series Designator
Unf -
Specification Data
80205-nas335 professional/industrial association standard
More from these suppliers
- 5935-00-959-6481 MPN NAS715-23BElectrical Receptacle Connector
- 1560-01-570-3546 MPN N27200339-001Aircraft Former
- 5940-01-381-7077 MPN NAS1063B180-191Terminal Board Marker Strip
- 5940-01-384-3955 MPN NAS1063A20TB42CTerminal Board Marker Strip
- 5305-00-007-9882 MPN NAS1100C04-18PMachine Screw
- 5305-00-008-9115 MPN NAS1190C02T7LSocket Head Cap Screw
- 5305-00-051-7326 MPN NAS1352-3H10Socket Head Cap Screw
- 5305-00-057-9088 MPN MS51021-74Setscrew
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-614-0714 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS335-11 | Naval Aircraft Standards |
NAS335-11 | National Aerospace Standards |