NSN 5305-00-616-6640
High Torque Screw
Between 2.063 inches and 2.110 inches fastener length, flat countersunk head style, between 0.752 inches and 0.762 inches head diameter, grip diameter: between 0.3733 inches and 0.5742 inches .
Manufacturer part number NAS336CPA20 for national stock number 5305006166640.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-616-6640.
-
MPN or Model
NAS336CPA20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.615 inches and 0.682 inches -
Fastener Length
Between 2.063 inches and 2.110 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.752 inches and 0.762 inches -
Grip Diameter
Between 0.3733 inches and 0.5742 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.375 inches -
Grip Length
Between 1.428 inches and 1.448 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf -
Specification Data
80205-nas498 professional/industrial association standard
More from these suppliers
- 5935-00-959-6481 MPN NAS715-23BElectrical Receptacle Connector
- 5940-01-238-6688 MPN NAS1389-11Conductor Splice
- 5940-01-455-2468 MPN NAS1063A10-105BCTerminal Board Marker Strip
- 5935-01-479-7271 MPN NAS1677D6-11NElectrical Connector Cable Clamp
- 5940-01-451-4311 MPN NAS1744-1Conductor Splice
- 5305-00-007-0279 MPN NAS1100C06-14PMachine Screw
- 5305-00-008-5905 MPN NAS1189E02T5LSocket Head Cap Screw
- 5305-00-008-7856 MPN NAS1742C04T6USocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-616-6640 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS336CPA20 | National Aerospace Standards |