NSN 5305-00-633-0830
Panel Assembly Fastener
3.440 inches fastener length, round head style, 0.625 inches head diameter, head height: between 0.180 inches and 0.210 inches .
Manufacturer part number 204-001-808-3 for national stock number 5305006330830.
Datasheet
-
Product description
Shoulder Screw NSN 5305-00-633-0830.
-
MPN or Model
204-001-808-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.402 inches and 0.407 inches -
Fastener Length
3.440 inches -
Head Style
Round -
Head Diameter
0.625 inches -
Head Height
Between 0.180 inches and 0.210 inches -
Shoulder Diameter
0.3738 inches first shoulder and 0.3742 inches first shoulder -
Shoulder Length
3.033 inches first shoulder and 3.038 inches first shoulder -
Shank Unthreaded Hole Diameter
0.075 inches first hole and 0.080 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Criticality Code Justification
Aatn -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.492 inches first hole and 1.502 inches first hole -
Shoulder Shape
Round first shoulder -
Material
Steel comp 4140 -
Material Specification
Mil-s-5626, cond c-4 military specification single material response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-866-9544 MPN 204-031-203-7Aircraft Floor
- 5935-01-338-1776 MPN 124-81439-1Electrical Connector Guide
- 5985-01-365-0188 MPN 6531-304800-1Radome
- 5305-01-174-6989 MPN 56462V1032H8EScrew
- 1560-00-789-4999 MPN 205-061-632-1Aircraft Fuel Tank
- 1560-00-034-3718 MPN 205-070-609-1Support Assembly
- 1680-00-075-9363 MPN 204-072-022-1Shackle Assembly
- 1560-00-141-0368 MPN 209-062-205-5Air Inducti Ejector
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in.) (1.5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is designed to be driven with either a wrench or an inserted driver or both in sizes below no. 10 (0.190 in.) (5 mm) nominal diameter. No. 10 (0.190 in.) (5 mm) and larger sizes must be designed for any type of inserted driver, but may also provide for external wrenching of the head. A locking feature may be incorporated in the design of the head or threads. For items which are both shouldered and have an externally relieved body, use screw, externally relieved body. For items with a no. 10 (0.190 in.) (5 mm) or larger thread diameter without an inserted driver head, use bolt, shoulder. Excludes bolt, internal wrenching and screw, cap, socket head.
Pricing and Availability
Get a quote for 5305-00-633-0830 shoulder screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
204-001-808-3 | Bell Helicopter Textron Inc. |
204-001-808-003 | Bell Helicopter Textron Inc. |
204-001-808-3 | Lockheed Martin Corporation |
204-001-808-3 | Textron Systems Corporation |
204-001-808-3 | Ruag Aerospace Services Gmbh |
Stock Check
- NS: 11
- AR: 1
- NE: 16
- SV: 1