NSN 5305-00-637-7953
Bolt Stove
Between 2.672 inches and 2.717 inches fastener length, flat countersunk head style, between 0.692 inches and 0.766 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number MILS7839 for national stock number 5305006377953.
Datasheet
-
Product description
Machine Screw NSN 5305-00-637-7953.
-
MPN or Model
MILS7839
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.512 inches and 0.670 inches -
Fastener Length
Between 2.672 inches and 2.717 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.692 inches and 0.766 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
Between 36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 8630 -
Screw Material Specification
Mil-s-6050 military specification single material response or an-s-9 military standard single material response -
Screw Surface Treatment
Cadmium and chromate -
Screw Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5985-01-192-2031 MPN 5035749-3Antenna Position Programmer
- 5940-01-425-6520 MPN NAS1063A15-327Terminal Board Marker Strip
- 5940-01-425-7417 MPN NAS1063A14-426Terminal Board Marker Strip
- 1680-01-478-1737 MPN NAS43DD0-38FCAircr Sleeve Spacer
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5305-00-052-6907 MPN MS24629-2Tapping Screw
- 5305-00-053-1078 MPN MS35199-40Machine Screw
- 5305-00-079-2588 MPN NAS1154-29Close Tolerance Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-637-7953 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MILS7839 | National Aerospace Standards |
NAS517-6-33 | National Aerospace Standards |
MILS7839 | Military Specifications |