NSN 5305-00-638-2362
Tap Bolt
Between 1.688 inches and 1.750 inches fastener length, hexagon head style, between 0.188 inches and 0.198 inches head height, width between flats: between 0.489 inches and 0.500 inches .
Manufacturer part number 9409225 for national stock number 5305006382362.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-638-2362.
-
MPN or Model
9409225
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.875 inches and 1.062 inches -
Fastener Length
Between 1.688 inches and 1.750 inches -
Head Style
Hexagon -
Head Height
Between 0.188 inches and 0.198 inches -
Width Between Flats
Between 0.489 inches and 0.500 inches -
Locking Feature
Distortions bearing surface of head -
Thread Diameter
0.312 inches -
Features Provided
Unfinished head -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Hardness Rating
32.0 rockwell c and 38.0 rockwell c -
Material
Steel -
Material Specification
Gm-300-m 24617 mfr ref single material response -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-683-2283 MPN 7901046-001Matched Resistor Set
- 5940-00-225-8860 MPN 5157049Lug Terminal
- 5925-00-964-2259 MPN 2262455Circuit Breaker
- 5305-00-013-1885 MPN 131885Machine Screw
- 5305-00-013-2054 MPN 132054Machine Screw
- 5305-00-015-9947 MPN 159947Machine Screw
- 5305-00-042-6958 MPN 426958Hexagon Head Cap Screw
- 5306-00-680-4916 MPN 8058502Threaded End Rod
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-638-2362 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
9409225 | General Motors Corp |
5306006382362 | E.c.a Etablissement |