NSN 5305-00-638-2505
Bolt Stove
0.680 inches fastener length, flat countersunk head style, 0.385 inches head diameter, internal drive style: slot.
Manufacturer part number 612A152P1 for national stock number 5305006382505.
Datasheet
-
Product description
Machine Screw NSN 5305-00-638-2505.
-
MPN or Model
612A152P1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.569 inches -
Fastener Length
0.680 inches -
Head Style
Flat countersunk -
Head Diameter
0.385 inches -
Internal Drive Style
Slot -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
118000 pounds per square inch -
Hardness Rating
Between 24.0 rockwell c and 30.0 rockwell c -
Countersink Angle
82.0 degrees -
Screw Material
Steel comp 4130 -
Screw Material Specification
Ams 6370 assn standard single material response -
Screw Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5930-00-050-2680 MPN 4098046-894Toggle Switch
- 4920-00-193-9747 MPN 9408M31G05Turbine S Container
- 4920-00-195-1708 MPN 1C5665P02Inner Protector Set
- 4920-00-241-4142 MPN 1C6336G01Aircraft Engine Maintenance Fixture
- 5905-00-405-8355 MPN R983P4992Film Fixed Resistor
- 4920-00-450-1847 MPN 21C1546-378Transo Support Assy
- 1560-00-558-0656 MPN 9679M04G09Aircraft Pylon Section
- 4920-00-571-8964 MPN 21C1024P010Turbin Dummy Casing
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-638-2505 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
612A152P1 | General Electric Company |
612A152P1 | General Electric Co |