NSN 5305-00-638-5386
Panel Screw
1.500 inches fastener length, pan no. 2 head style, between 0.382 inches and 0.408 inches head diameter, head height: 0.140 inches .
Manufacturer part number S0B62664-2 for national stock number 5305006385386.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-638-5386.
-
MPN or Model
S0B62664-2
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.625 inches -
Fastener Length
1.500 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.382 inches and 0.408 inches -
Head Height
0.140 inches -
First Diameter From Head
0.139 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.875 inches -
Internal Drive Style
Slot -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Externally Relieved Body Diameter Quantity
1 -
Material Specification
-264 mil-f-14072 military specification single material response -
Surface Treatment
Chromate zinc -
Thread Series Designator
Unf
More from these suppliers
- 5985-00-064-6416 MPN GS66070Fixed Attenuator
- 5905-00-131-3490 MPN 144ERESIST0R13300-0HFilm Fixed Resistor
- 5935-00-192-4776 MPN D14283Telephone Plug
- 5940-00-199-9621 MPN 25ATerminal Board
- 5975-00-345-0683 MPN P164490Splice Coupling
- 5905-00-810-5663 MPN GA53314A5563Film Fixed Resistor
- 5950-00-895-6901 MPN G312703REV4Radio Frequency Transformer
- 5935-01-036-9803 MPN G396127-6D1Y12Electrical Receptacle Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-638-5386 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S0B62664-2 | Us Army Communications & |
S0B62664-2 | Lucent Technologies Inc |
S0B62664-2 | American Telephone And Telegraph Co |
S0B62664-2 | At And T Corp |
S0B62664-2 | Lucent Technologies Inc |