NSN 5305-00-639-8760
High Torque Screw
Between 2.014 inches and 2.061 inches fastener length, flat countersunk head style, between 0.880 inches and 0.890 inches head diameter, grip diameter: between 0.4362 inches and 0.4367 inches .
Manufacturer part number NAS337A17-5 for national stock number 5305006398760.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-639-8760.
-
MPN or Model
NAS337A17-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.630 inches and 0.697 inches -
Fastener Length
Between 2.014 inches and 2.061 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.880 inches and 0.890 inches -
Grip Diameter
Between 0.4362 inches and 0.4367 inches -
Single Shear Strength
14300 pounds per square inch -
Internal Drive Style
Hexagon -
Thread Diameter
0.437 inches -
Grip Length
Between 0.384 inches and 1.364 inches -
Width Across Flats
Between 0.313 inches and 0.316 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Thread Series Designator
Unf -
Specification Data
80205-nas337 professional/industrial association standard
More from these suppliers
- 5940-01-383-9955 MPN NAS1063A15-5MLSTerminal Board Marker Strip
- 5305-00-052-5949 MPN MS35198-8Machine Screw
- 5305-00-052-7469 MPN MS35198-100Machine Screw
- 5305-00-137-1444 MPN NAS1351C3-28Socket Head Cap Screw
- 5305-00-151-5688 MPN MS27039C0819Machine Screw
- 5305-00-162-4813 MPN NAS1189-02P11LSocket Head Cap Screw
- 5305-00-187-5610 MPN NAS1101E08-24Machine Screw
- 5305-00-274-0412 MPN NAS608C832-16Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-639-8760 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS337A17-5 | National Aerospace Standards |