NSN 5305-00-651-1723
High Torque Screw
Between 2.047 inches and 2.078 inches fastener length, button head style, between 0.609 inches and 0.641 inches head diameter, head height: between 0.141 inches and 0.172 inches .
Manufacturer part number S2329525-32 for national stock number 5305006511723.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-651-1723.
-
MPN or Model
S2329525-32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.261 inches and 0.406 inches -
Fastener Length
Between 2.047 inches and 2.078 inches -
Head Style
Button -
Head Diameter
Between 0.609 inches and 0.641 inches -
Head Height
Between 0.141 inches and 0.172 inches -
Grip Diameter
Between 0.3112 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Internal Drive Style
Torque -
Thread Diameter
0.312 inches -
Grip Length
Between 1.672 inches and 1.703 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.859 inches first hole and 1.891 inches first hole -
Surface Finish
20.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium head -
Thread Series Designator
Unf
More from these suppliers
- 4820-00-438-5788 MPN 1016496Valve Seat
- 1560-00-573-9666 MPN 5445352-27Fairing Assy
- 1560-00-574-7336 MPN 4444517-1Left Hand Fitting
- 5940-00-587-6884 MPN 4568203Feedthru Terminal
- 1560-00-606-0844 MPN 2383405-501Bearing Assy
- 1560-00-699-3674 MPN 5334746-196Accessory Cowling Chute Assembly
- 4920-00-764-0087 MPN 5916720-501Main Landing Keeper
- 1560-00-854-5149 MPN 5815213-1Wing Cap
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-651-1723 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S2329525-32 | Boeing Company, The |
S2329525-32 | Boeing Company, The |