NSN 5305-00-655-6278
Tap Bolt
0.750 inches fastener length, hexagon head style, between 0.272 inches and 0.291 inches head height, width between flats: between 0.612 inches and 0.625 inches .
Manufacturer part number 180143 for national stock number 5305006556278.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-655-6278.
-
MPN or Model
180143
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.750 inches -
Fastener Length
0.750 inches -
Head Style
Hexagon -
Head Height
Between 0.272 inches and 0.291 inches -
Width Between Flats
Between 0.612 inches and 0.625 inches -
Thread Diameter
0.438 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
23.0 rockwell c and 30.0 rockwell c -
Material
Steel -
Surface Treatment
Cadmium and chromate or zinc and chromate -
Thread Series Designator
Unc -
Nondefinitive Specification/std Data
10p style and 2 type
More from these suppliers
- 5940-00-246-6297 MPN 5935457Terminal Board
- 5945-00-644-9706 MPN 1335220Thermal Flasher
- 5935-00-772-2238 MPN 5293578Electrical Connector Cable Clamp
- 5905-00-810-9068 MPN 8597263-459Film Fixed Resistor
- 4920-00-066-9846 MPN 6795907Reduction Drill Jig
- 4920-00-862-5712 MPN 6796846-5Adapter Cone
- 4920-00-862-5725 MPN 6799235-201Engine Pin Retainer
- 5305-00-010-0765 MPN 100765Machine Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-655-6278 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
180143 | General Motors Corp |
FFS92 | Federal Specifications |