NSN 5305-00-655-7577
High Torque Screw
Between 0.953 inches and 1.000 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, hole diameter: 0.076 inches .
Manufacturer part number NAS334CP7-5 for national stock number 5305006557577.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-655-7577.
-
MPN or Model
NAS334CP7-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.443 inches and 0.510 inches -
Fastener Length
Between 0.953 inches and 1.000 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Hole Diameter
0.076 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Hole Configuration Style
Hexagon perpendicular -
Countersink Angle
100.0 degrees -
Material
Steel -
Thread Series Designator
Unjf -
Specification Data
80205-nas334c+7-5 professional/industrial association standard
More from these suppliers
- 5305-00-008-5895 MPN NAS1102-06-14BMachine Screw
- 5305-00-032-3697 MPN NAS1352-08LL10PSocket Head Cap Screw
- 5305-00-045-1988 MPN MS90725-87Hexagon Head Cap Screw
- 5305-00-051-2336 MPN MS51958-115Machine Screw
- 5305-00-051-7087 MPN MS35203-16Machine Screw
- 5305-00-057-9585 MPN MS35199-7Machine Screw
- 5305-00-082-6738 MPN MS51959-112Machine Screw
- 5305-00-143-9612 MPN NAS1351C01-6Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-655-7577 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS334CP7-5 | National Aerospace Standards |