NSN 5305-00-679-4637
Panel Assembly Fastener
1.875 inches fastener length, flat chamfer head style, 0.875 inches head diameter, head height: 0.250 inches .
Manufacturer part number 56B23042-7 for national stock number 5305006794637.
Datasheet
-
Product description
Shoulder Screw NSN 5305-00-679-4637.
-
MPN or Model
56B23042-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.500 inches -
Fastener Length
1.875 inches -
Head Style
Flat chamfer -
Head Diameter
0.875 inches -
Head Height
0.250 inches -
Internal Drive Style
Slot -
Thread Diameter
0.438 inches -
Thready Qty Per Inch (tpi)
20 -
Material
Steel comp 1213 -
Material Specification
Astm a108 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type i, class 1 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-241-3726 MPN 3350-844500-2823Nonprecision Wire Wound Variable Resistor
- 1680-00-485-2934 MPN 41A9177Relief Venturi
- 5935-01-284-0416 MPN 6C59D-1Electrical Receptacle Connector
- 1680-01-034-4514 MPN JEN5155Sleeve Assembly Repair Kit
- 4820-01-157-1673 MPN 8222439-26Rupturable Disk
- 5985-01-365-0700 MPN 8949412-01Electrical Dummy Load
- 4920-01-168-9614 MPN 8222994Aircraft Maintenance Fixture
- 4920-00-905-4721 MPN 66J38069-1Aircraft Maintenance Fixture
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in.) (1.5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is designed to be driven with either a wrench or an inserted driver or both in sizes below no. 10 (0.190 in.) (5 mm) nominal diameter. No. 10 (0.190 in.) (5 mm) and larger sizes must be designed for any type of inserted driver, but may also provide for external wrenching of the head. A locking feature may be incorporated in the design of the head or threads. For items which are both shouldered and have an externally relieved body, use screw, externally relieved body. For items with a no. 10 (0.190 in.) (5 mm) or larger thread diameter without an inserted driver head, use bolt, shoulder. Excludes bolt, internal wrenching and screw, cap, socket head.
Pricing and Availability
Get a quote for 5305-00-679-4637 shoulder screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
56B23042-7 | Department Of The Air Force |
56A23042 | Department Of The Air Force |
56A23042 | Standard Mfg Co Inc |
56B23042 | San Antonio Air Logistics Center |
56A23042 | Gse Production And Support Llc |