NSN 5305-00-680-6637
Panel Screw
2.156 inches fastener length, knurled no. 4 head style, 0.625 inches head diameter, head height: 0.438 inches .
Manufacturer part number 7011298P1 for national stock number 5305006806637.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-680-6637.
-
MPN or Model
7011298P1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
2.156 inches -
Head Style
Knurled no. 4 -
Head Diameter
0.625 inches -
Head Height
0.438 inches -
First Diameter From Head
0.180 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
1.594 inches -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
20 -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 303 -
Material Specification
Qq-s-763 federal specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unc
More from these suppliers
- 5950-00-019-5887 MPN 7749386P1Radio Frequency Transformer
- 5950-00-055-9404 MPN 9T51Y32Power Transformer
- 5950-00-079-5076 MPN 7747903G003Radio Frequency Coil
- 5935-00-498-0003 MPN K711245REV3PT1Tip Jack
- 5935-00-557-7891 MPN 7416691P1Electrical Receptacle Connector
- 5930-00-628-8435 MPN 77C712463P1Code Indicating Wheel Switch
- 5930-00-871-7494 MPN 77D603098G001Layer Switch
- 5985-00-915-8536 MPN 7236033G002Waveguide Assembly
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
![Mechanic Bill explains Panel Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-00-680-6637 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7011298P1 | Lockheed Martin Corporation |
7011298P1 | General Electric Co |
7011298P1 | General Electric Co |
7011298P1 | General Electric Co |
7011298P1 | Lockheed Martin Corporation |
7011298P1 | General Electric Co |
7011298P1 | Lockheed Martin Corporation |
7011298P1 | General Electric Co |
7011298P1 | Lockheed Martin Corporation |
7011298P1 | General Electric Co |
7011298P1 | General Electric Co |
7011298P1 | General Electric Co |
7011298P1 | Lockheed Martin Corporation |
7011298P1 | Lockheed Martin Corporation |
7011298P1 | General Electric Co |
7011298P1 | General Electric Co |
7011298P1 | Lockheed Martin Corporation |
7011298P1 | General Electric Co |
7011298P1 | General Electric Co |
7011298P1 | Lockheed Martin Corporation |
7011298P1 | General Electric Co |
7011298P1 | Lockheed Martin Corporation |
7011298P1 | General Electric Co |
7011298P1 | Lockheed Martin Corporation |
7011298P1 | General Electric Co |
7011298P1 | Lockheed Martin Corporation |
7011298P1 | General Electric Co |
Stock Check
![](/public/images/partscage_shelf3.png)