NSN 5305-00-689-4376
Panel Screw
Between 0.384 inches and 0.401 inches fastener length, flat chamfer head style, between 0.122 inches and 0.128 inches head diameter, head height: between 0.042 inches and 0.048 inches .
Manufacturer part number 201241-2 for national stock number 5305006894376.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-689-4376.
-
MPN or Model
201241-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.090 inches and 0.096 inches -
Fastener Length
Between 0.384 inches and 0.401 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.122 inches and 0.128 inches -
Head Height
Between 0.042 inches and 0.048 inches -
First Diameter From Head
Between 0.069 inches and 0.075 inches -
Second Diameter From Head
Between 0.0925 inches and 0.0933 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.028 inches and 0.034 inches -
Distance From Largest Bearing Surface Of Head To End Of Second Diameter
Between 0.279 inches and 0.285 inches -
Internal Drive Style
Slot -
Thread Diameter
0.086 inches -
Thready Qty Per Inch (tpi)
64 -
Externally Relieved Body Diameter Quantity
2 -
Material
Steel comp 302 -
Material Specification
Qq-s-763 federal specification single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-689-4376 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
201241-2 | Aerosonic Llc |