NSN 5305-00-701-7985
High Torque Screw
Between 1.110 inches and 1.140 inches fastener length, flat countersunk head style, between 0.441 inches and 0.474 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number 7S37-5-12 for national stock number 5305007017985.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-701-7985.
-
MPN or Model
7S37-5-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.350 inches and 0.400 inches -
Fastener Length
Between 1.110 inches and 1.140 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.441 inches and 0.474 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.994 inches first hole and 1.014 inches first hole -
Material
Steel comp 4130 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2 @cl3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-117-2400 MPN 84-16001-1Aileron And Trim Ta
- 1560-00-144-6886 MPN 66-13073-21Wing Frame Assembly
- 1560-00-185-9195 MPN 55-18001-1Outer Flap Assembly
- 1560-00-240-7552 MPN 265-318351Aircraft Structural Component Support
- 1560-00-960-0642 MPN 246-52303-1Aircraft Structural Component Support
- 5975-01-127-5299 MPN 192-54159Electrical Bracket
- 1680-01-187-9239 MPN L8800011-003Push-pull Rod
- 1560-01-204-3738 MPN L3227345-071Special Purpose Thermal Insulation
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-701-7985 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7S37-5-12 | Boeing Company, The |