NSN 5305-00-701-7995
High Torque Screw
Between 4.860 inches and 4.890 inches fastener length, flat countersunk head style, between 0.441 inches and 0.474 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number 7S37-5-72 for national stock number 5305007017995.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-701-7995.
-
MPN or Model
7S37-5-72
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.350 inches and 0.400 inches -
Fastener Length
Between 4.860 inches and 4.890 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.441 inches and 0.474 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches and 0.086 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 4.490 inches and 4.510 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.754 inches and 4.764 inches first hole -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4130 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2 cl3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-150-8272 MPN 55-42019Car Screen Assembly
- 1560-00-863-4471 MPN 265-160001-51Aileron
- 4920-01-157-5918 MPN 51A15000-001Aircraft Components Test Set Subassembly
- 1560-01-173-9703 MPN L1700008-015Aircraft Structural Component Support
- 4920-01-178-3450 MPN R-TBD-879Electrical-electronic Equipment Test Station
- 1560-01-204-7583 MPN L3226759-071Special Purpose Thermal Insulation
- 1560-01-253-7748 MPN L3053615-071Aircraft Fairing
- 1560-01-262-4310 MPN L3058059-007Aircraft Fairing
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-701-7995 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7S37-5-72 | Boeing Company, The |
7S37-5-72 | Boeing Company, The |