NSN 5305-00-702-8149
High Torque Screw
Between 1.238 inches and 1.285 inches fastener length, flat countersunk head style, between 0.451 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 51B334-15H for national stock number 5305007028149.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-702-8149.
-
MPN or Model
51B334-15H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.290 inches and 0.357 inches -
Fastener Length
Between 1.238 inches and 1.285 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.451 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
Between 99.5 degrees and 100.5 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.122 inches first hole and 1.169 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2 cl3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
76823-51b334 manufacturers standard
More from these suppliers
- 1680-00-021-6035 MPN 2-70900-5Linear Electro-mechanical Actuator
- 4920-00-021-7719 MPN 3-76585-503Aircraft Maintenance Alignment Jig
- 1560-00-074-2510 MPN 40P100-13Aircraft Access Cover
- 1560-00-148-1859 MPN 6-23228-4Aircraft Structural Component Support
- 1560-00-869-8531 MPN 82R414-1080Instrument Panel Rod
- 4920-00-886-7994 MPN 6-76211-1Harmonizatio Target
- 1560-00-917-8048 MPN 6-24306-4Landing Gear Door Flap
- 1560-00-929-6771 MPN 6-52748-21Pylon Fu Valve Assy
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-702-8149 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B334-15H | Northrop Grumman Technical Services, |
51B334-15H | Northrop Grumman Systems Corporation |
51B334-15H | Northrop Grumman Systems Corporation |