NSN 5305-00-702-9070
Tap Bolt
Between 2.906 inches and 3.000 inches fastener length, hexagon head style, between 0.150 inches and 0.163 inches head height, width between flats: between 0.428 inches and 0.437 inches .
Manufacturer part number 2078+2422+001 for national stock number 5305007029070.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-702-9070.
-
MPN or Model
2078+2422+001
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.750 inches and 0.938 inches -
Fastener Length
Between 2.906 inches and 3.000 inches -
Head Style
Hexagon -
Head Height
Between 0.150 inches and 0.163 inches -
Width Between Flats
Between 0.428 inches and 0.437 inches -
End Application
Rg-33 mrap; mrap - cougar cat1 a2 -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
20 -
Hardness Rating
80.0 rockwell b -
Minimum Yield Strength
30000 pounds per square inch -
Material
Stainless steel -
Material Specification
66 federal standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-104-8334 MPN 7100-0049-333Composition Fixed Resistor
- 5905-00-114-3897 MPN 522056Composition Fixed Resistor
- 5305-00-011-6225 MPN 116225Machine Screw
- 5305-00-019-0911 MPN 190911Hexagon Head Cap Screw
- 5305-00-021-4839 MPN 214839Hexagon Head Cap Screw
- 5935-00-137-0932 MPN NAS1666-18Electrical Connector Cable Clamp
- 5940-00-833-5836 MPN NAS1063A2-702Terminal Board Marker Strip
- 5940-01-353-5703 MPN NAS1063B-1-10Terminal Board
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-702-9070 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
2078+2422+001 | Antenna Products Corporation |
FFS85 | Federal Specifications |
NASM35307 | National Aerospace Standards |
MS35307-318 | National Aerospace Standards |
213684 | Army Weapons Command |
MS35307-318 | Military Standards |
MS35307-18 | Military Standards |
23111-99-0405 | Henschel Wehrtechnik Gmbh |
5305007029070 | E.c.a Etablissement |