NSN 5305-00-720-6109
High Torque Screw
0.925 inches fastener length, flat countersunk head style, between 0.362 inches and 0.395 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 7S36-4A8 for national stock number 5305007206109.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-720-6109.
-
MPN or Model
7S36-4A8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
0.925 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.362 inches and 0.395 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
63.0 microinches grip -
Material
Steel comp 4130 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2 cl3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-124-7736 MPN 55-31063F Bulkhead Assembly
- 1560-00-323-6714 MPN 168-73019Instrume Cable Assy
- 4820-00-376-6686 MPN 151-58086-3Check Valve
- 1560-00-510-3747 MPN 227-17005-1Aircraft Leading Edge
- 1560-00-692-2030 MPN 152-31802-25Cockpit Canopy Rod
- 1560-00-795-5130 MPN 246-33346-1Landing Gear Door Cam
- 1560-00-962-8811 MPN 265-343324Wheel Stop Assembly
- 4920-01-178-9129 MPN R-TBD-1016Selector Valve Mounting Fixture
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-720-6109 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7S36-4A8 | Boeing Company, The |