NSN 5305-00-721-5770
High Torque Screw
1.531 inches fastener length, fillister head style, 0.188 inches head diameter, head height: 0.064 inches .
Manufacturer part number S1665-61769-1 for national stock number 5305007215770.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-721-5770.
-
MPN or Model
S1665-61769-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.256 inches -
Fastener Length
1.531 inches -
Head Style
Fillister -
Head Diameter
0.188 inches -
Head Height
0.064 inches -
Grip Diameter
Between 0.1245 inches and 0.1247 inches -
Internal Drive Style
Slot -
Thread Diameter
0.125 inches -
Grip Length
1.275 inches -
Thready Qty Per Inch (tpi)
40 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 33.0 rockwell c -
Surface Finish
100.0 microinches -
Material
Steel comp 4130 -
Surface Treatment
Cadmium or cadmium and chromate or cadmium and phosphate or oxide -
Thread Series Designator
Unc
More from these suppliers
- 1560-00-019-8775 MPN 61200-63020-041Aircraft Structural Panel
- 1560-00-056-5849 MPN S6120-61203-8Aircraft Structural Plate
- 1560-00-064-1980 MPN 65202-07060-041Gear B Beam Support
- 1560-00-155-1335 MPN S6135-22076-1Lube System Bracker
- 1560-00-180-5364 MPN S535530Tail Drive Sha Boot
- 1560-00-187-8901 MPN 61200-63025-042Aircraft Structural Panel
- 1680-00-303-8586 MPN S14-30-3121-2Bell Crank
- 5930-00-405-8066 MPN 65700-90122-103Rotary Switch
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-721-5770 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S1665-61769-1 | Sikorsky Aircraft Corporation |