NSN 5305-00-724-3750
High Torque Screw
Between 0.949 inches and 0.979 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1203-11D for national stock number 5305007243750.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-724-3750.
-
MPN or Model
NAS1203-11D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.949 inches and 0.979 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.847 inches first hole -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1203 professional/industrial association standard
More from these suppliers
- 5305-00-100-6586 MPN NAS1221-06-2PMachine Screw
- 5305-00-639-4534 MPN S2329074-13Socket Head Cap Screw
- 5305-00-390-0586 MPN NAS1101E4-8Machine Screw
- 5305-00-915-2576 MPN NAS1132C3Close Tolerance Screw
- 5305-01-076-4889 MPN NAS1101-08-26Machine Screw
- 5305-00-008-5910 MPN NAS1189E3T10Socket Head Cap Screw
- 5305-00-916-4909 MPN NAS1134-2Close Tolerance Screw
- 5305-00-928-9649 MPN NAS1221-3-6PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-724-3750 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1203-11D | Eriks Southwest Inc |
NAS1203-11D | Apcom Inc |
NAS1203-11D | Nor-cal Supply Co.inc. |
NAS1203-11D | National Aerospace Standards |
NAS1203-11D | Hi-shear Corporation |
NAS1203-11D | Sps Technologies, Llc |
NAS1203-11D | Lisi Aerospace Canada Corp |
NAS1203-11D | Sps Technologies, Llc |
NAS1203-11D | Lawrence Engineering And Supply Inc |
NAS1203-11D | F And C Sales Inc |
NAS1203-11D | Collins Engineering Corp |
NAS1203-11D | Durham Aircraft Service Inc |
NAS1203-11D | Air Industries Co Inc |