NSN 5305-00-724-6840
Tap Bolt
Between 4.406 inches and 4.500 inches fastener length, hexagon head style, between 0.348 inches and 0.371 inches head height, width between flats: between 0.798 inches and 0.812 inches .
Manufacturer part number 1C972 for national stock number 5305007246840.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-724-6840.
-
MPN or Model
1C972
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 1.374 inches and 1.562 inches -
Fastener Length
Between 4.406 inches and 4.500 inches -
Head Style
Hexagon -
Head Height
Between 0.348 inches and 0.371 inches -
Width Between Flats
Between 0.798 inches and 0.812 inches -
Thread Diameter
0.562 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
25.0 rockwell c and 34.0 rockwell c -
Material
Steel -
Material Specification
Sae gr 5 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification all treatment responses -
Thread Series Designator
Unf
More from these suppliers
- 5930-00-407-5034 MPN 1734585Lift Limit Switch
- 5306-00-466-8070 MPN 611474Machine Bolt
- 5306-00-833-9055 MPN 772925Special Bolt
- 5306-01-359-8755 MPN 016.06.2600Machine Bolt
- 5935-00-400-4774 MPN NAS1668-3Electrical Connector End Seal Plug
- 5305-00-038-2431 MPN NAS514P632-22BMachine Screw
- 5305-00-059-8243 MPN MS35214-18Machine Screw
- 5305-00-068-0542 MPN NASM24678-7CSocket Head Cap Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-724-6840 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
1C972 | Dana Off Highway Products, Llc |
MS90726-150 | National Aerospace Standards |
MS90726-150 | Military Standards |
1C972 | Clark Equipment Co |