NSN 5305-00-730-4804
Panel Screw
2.500 inches fastener length, knurled no. 1 head style, 0.875 inches head diameter, head height: 0.312 inches .
Manufacturer part number 1851093PC1 for national stock number 5305007304804.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-730-4804.
-
MPN or Model
1851093PC1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
2.500 inches -
Head Style
Knurled no. 1 -
Head Diameter
0.875 inches -
Head Height
0.312 inches -
First Diameter From Head
Between 0.225 inches and 0.235 inches -
Internal Drive Style
Slot -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
18 -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 310 or steel comp 316 -
Material Specification
Qq-s-763 federal specification all material responses or qq-w-423 federal specification all material responses -
Surface Treatment
Passivate -
Surface Treatment Specification
Mil-f-14072, finish e300 military specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-003-5325 MPN 4903629-103Electrical Receptacle Connector
- 5905-00-112-4963 MPN 1820944-242Film Fixed Resistor
- 5930-00-139-5719 MPN 2419018Rotary Switch
- 5940-00-171-0721 MPN 653956GP1Terminal Board
- 5930-00-172-2293 MPN 2550955-50Switch Subassembly
- 5930-00-179-1203 MPN 2667786-1Push Switch
- 5930-00-246-5215 MPN 17184PC2Push Switch
- 5950-00-247-8184 MPN 426670PC3Power Transformer
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-730-4804 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
1851093PC1 | Navair And Navsea Managed |
1851093PC1REVA | Naval Sea Systems Command |
3111-1035P1 | Raytheon Company |
3111-1035P1 | Raytheon Company |
3111-1035P1 | Raytheon Company |