NSN 5305-00-759-8025
Panel Screw
0.750 inches fastener length, flat chamfer head style, 0.219 inches head diameter, head height: 0.188 inches .
Manufacturer part number 7598025 for national stock number 5305007598025.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-759-8025.
-
MPN or Model
7598025
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Length
0.235 inches -
Fastener Length
0.750 inches -
Head Style
Flat chamfer -
Head Diameter
0.219 inches -
Head Height
0.188 inches -
First Diameter From Head
Between 0.158 inches and 0.162 inches -
Second Diameter From Head
Between 0.101 inches and 0.105 inches -
Third Diameter From Head
Between 0.148 inches and 0.152 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.235 inches -
Distance From Largest Bearing Surface Of Head To End Of Second Diameter
0.280 inches -
Distance From Largest Bearing Surface Of Head To End Of Third Diameter
0.513 inches -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Steel comp 303 -
Material Specification
Astm a582 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-100-5092 MPN G383724-14Electrical Plug Connector
- 5930-01-213-4083 MPN G644228Switch Actuator Adapter
- 5950-00-518-0481 MPN ES0690324-2Radio Frequency Coil
- 5905-00-279-7193 MPN 8019300Film Fixed Resistor
- 5905-00-283-5685 MPN 7602683Composition Fixed Resistor
- 5930-00-472-2349 MPN 8606885Sensitive Switch
- 5935-00-869-2805 MPN 11731045Connector Adapter
- 5905-00-950-6919 MPN 8623438-6Noninductive Wire Wound Fixed Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-759-8025 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7598025 | Us Army Ardec Rdecom |
BA93287 | At And T Corp |
BA93287 | Lucent Technologies Inc |