NSN 5305-00-763-4453
High Torque Screw
Between 1.302 inches and 1.367 inches fastener length, flat countersunk head style, between 0.662 inches and 0.668 inches head diameter, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number 51B581-7-14 for national stock number 5305007634453.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-763-4453.
-
MPN or Model
51B581-7-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.453 inches -
Fastener Length
Between 1.302 inches and 1.367 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.662 inches and 0.668 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Internal Drive Style
Hexagon -
Thread Diameter
0.438 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Width Across Flats
0.375 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.5 degrees and 100.5 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.178 inches first hole and 1.243 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4340 or steel comp 4140 or steel comp 8740 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-164-6961 MPN 3-12314-5Aircraft Skin
- 1560-00-280-1502 MPN 3-11882-67Aircraft Access Cover
- 1560-00-682-5273 MPN 6-23381-2Wing Pylon Plug Assembly
- 1560-00-890-8341 MPN 6-24301-526Aircraft Door
- 4920-00-936-9811 MPN 3-76224-1Interface Device Adapter Assembly
- 1560-00-938-9230 MPN 3-13636-10Canopy Tension Rod Assembly
- 1560-00-959-7746 MPN 3-11234-4BFuselage Firewall
- 1680-01-418-1613 MPN 14-73903-7Aircraft Controller Grip Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-763-4453 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B581-7-14 | Northrop Grumman Technical Services, |
51B581-7-14 | Northrop Grumman Systems Corporation |