NSN 5305-00-764-0066
Bolt Stove
0.438 inches fastener length, flat countersunk head style, between 0.292 inches and 0.332 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN505C8-7 for national stock number 5305007640066.
Datasheet
-
Product description
Machine Screw NSN 5305-00-764-0066.
-
MPN or Model
AN505C8-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.276 inches and 0.438 inches -
Fastener Length
0.438 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.292 inches and 0.332 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 -
Screw Material Specification
66 federal standard all material responses -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5985-01-068-4642 MPN PL 782507-001Waveguide Assembly
- 5305-00-059-8448 MPN 8914385-107Machine Screw
- 5305-00-059-8448 MPN 8914385-7Machine Screw
- 5935-00-936-3606 MPN 10163-3Electrical Receptacle Connector
- 5905-01-360-5054 MPN 2613333-11Inductive Wire Wound Fixed Resistor
- 5905-00-189-9410 MPN A8835333-211Film Fixed Resistor
- 5950-00-228-6160 MPN P721036Radio Frequency Transformer
- 5985-00-239-1134 MPN 2169726-501Waveguide Assembly
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-764-0066 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN505C8-7 | Zf Industrieantriebe Witten Gmbh |
AN505C8R7 | Zf Industrieantriebe Witten Gmbh |
MS35200-41 | Zf Industrieantriebe Witten Gmbh |
MS35249-51 | Zf Industrieantriebe Witten Gmbh |
MS51959-44 | Military Standards |
756-9887-005 | Rockwell Collins, Inc. |
6232-0807 | Honeywell International Inc |
0920-44 | Alliant Techsystems Operations Llc |
756-9887-005 | Rockwell Collins, Inc. |
342-0079-00 | Rockwell Collins, Inc. |
342-0079-000 | Rockwell Collins, Inc. |
342-0079-000 | Rockwell Collins, Inc. |
22265ADX | Airdale Express Llc |
8929207-11 | L-3 Communications Corporation |
2468807-44 | Zf Industrieantriebe Witten Gmbh |
033909 | Safran Martin-baker France |
035806 | Safran Martin-baker France |
984070 | Safran Martin-baker France |
DS151C3 | Martin Baker Aircraft Co Ltd |
0740837 | General Dynamics European Land |
230-013-044 | Elettronica Gmbh |
230-013-044 | Elettronica Spa |
MS51959-44 | Aero Stock |
22265 | Federal Screw Products Inc. |
8929207-11 | Lockheed Martin Corp |
AN505-8-7 | Aeronautical Standards Group |
10125473 | Nimikkeistokeskus Ncb Finland |
8929207-11 | Lockheed Martin Corporation |
5305007640066 | E.c.a Etablissement |
342-0079-00 | Rockwell Collins, Inc. |
Stock Check
- NE: 8547
- NS: 1870
- AR: 15
- OH: 1