NSN 5305-00-765-4244
Bolt Stove
Between 0.219 inches and 0.250 inches fastener length, flat countersunk undercut head style, between 0.292 inches and 0.332 inches head diameter, head height: between 0.058 inches and 0.070 inches .
Manufacturer part number AN505C8-4 for national stock number 5305007654244.
Datasheet
-
Product description
Machine Screw NSN 5305-00-765-4244.
-
MPN or Model
AN505C8-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.188 inches and 0.250 inches -
Fastener Length
Between 0.219 inches and 0.250 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.292 inches and 0.332 inches -
Head Height
Between 0.058 inches and 0.070 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 -
Screw Material Specification
66 federal standard all material responses -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-897-6683 MPN 8716101-4Electrical Receptacle Connector Body
- 5940-00-959-5439 MPN 8262405-1Feedthru Terminal
- 5950-00-150-1039 MPN 2188397-1Power Transformer
- 5905-01-023-4477 MPN 1710700-319Composition Fixed Resistor
- 5950-01-106-4232 MPN 8723000-358Radio Frequency Coil
- 5305-00-068-5405 MPN 8200165-6Socket Head Cap Screw
- 5940-00-009-1491 MPN 546-7176-002Terminal Board
- 5905-00-088-0720 MPN 714-1945-000Composition Fixed Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-765-4244 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN505C8-4 | Zf Industrieantriebe Witten Gmbh |
AN505C8-4D | Zf Industrieantriebe Witten Gmbh |
MS35200-38 | Zf Industrieantriebe Witten Gmbh |
8929207-5 | L-3 Communications Corporation |
35249-48 | Zf Industrieantriebe Witten Gmbh |
MS51959-41 | National Aerospace Standards |
342-0076-000 | Rockwell Collins, Inc. |
40524005016 | Tadiran Ltd |
8929207-5 | Lockheed Martin Corp |
AN505C8-4 | Aeronautical Standards Group |
MS51959-41 | Military Standards |
8929207-5 | Lockheed Martin Corporation |