NSN 5305-00-766-5306
High Torque Screw
Between 0.978 inches and 0.983 inches fastener length, flat countersunk head style, between 0.390 inches and 0.395 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 51B581-4-11H for national stock number 5305007665306.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-766-5306.
-
MPN or Model
51B581-4-11H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 0.978 inches and 0.983 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.390 inches and 0.395 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.5 degrees and 100.5 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.862 inches first hole and 0.867 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-217-7712 MPN 191488Machine Screw
- 5305-00-781-5663 MPN AIC813-3-R16Machine Screw
- 5305-01-243-9357 MPN SM-C-800983-37Socket Head Cap Screw
- 5305-01-329-7671 MPN AIC1652-4-6AClose Tolerance Screw
- 5305-01-417-2495 MPN TX1027D4-20Close Tolerance Screw
- 5305-01-428-9525 MPN AIC1353-5CSocket Head Cap Screw
- 5305-01-462-1649 MPN AIC9535-8-7Close Tolerance Screw
- 5305-01-462-2754 MPN TX1027D5-7AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-766-5306 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B581-4-11H | Northrop Grumman Technical Services, |
51B581-4-11H | Northrop Grumman Systems Corporation |
51B581-4-11H | Arconic Global Fasteners & Rings, |
51B581-4-11H | Sps Technologies, Llc |
51B581-4-11H | Sps Technologies, Llc |
51B581-4-11H | Hi-shear Corporation |
51B581-4-11H | Sps Technologies, Llc |
51B581-4-11H | Alcoa Global Fasteners, Inc. |
51B581-4-11H | Lisi Aerospace Canada Corp |
51B581-4-11H | Erwood Inc |
51B581-4-11H | Northrop Grumman Systems Corporation |