NSN 5305-00-768-0365
Panel Screw
0.531 inches fastener length, knurled no. 4 head style, 0.250 inches head diameter, head height: 0.312 inches .
Manufacturer part number 320329-1 for national stock number 5305007680365.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-768-0365.
-
MPN or Model
320329-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.219 inches -
Fastener Length
0.531 inches -
Head Style
Knurled no. 4 -
Head Diameter
0.250 inches -
Head Height
0.312 inches -
First Diameter From Head
Between 0.118 inches and 0.120 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.312 inches -
Internal Drive Style
Slot -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 303 -
Material Specification
66 federal standard single material response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-666-4791 MPN N2562-43115-2Electrical Receptacle Connector
- 5935-00-893-8505 MPN 513214-36-10PElectrical Plug Connector
- 1680-01-520-6339 MPN 262220-EA Brace Bar Support
- 5935-01-523-2058 MPN 8237-6003Electrical Receptacle Connector
- 5305-00-132-1337 MPN 509441-640Socket Head Cap Screw
- 5306-00-721-4584 MPN 90444-728Machine Bolt
- 6145-00-284-0626 MPN 612474-10BLUEEElectrical Wire
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-768-0365 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
320329-1 | Naval Air Warfare Center Aircraft |