NSN 5305-00-774-9584
Bolt Stove
0.375 inches fastener length, flat countersunk head style, between 0.292 inches and 0.332 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN510C8-6 for national stock number 5305007749584.
Datasheet
-
Product description
Machine Screw NSN 5305-00-774-9584.
-
MPN or Model
AN510C8-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.319 inches and 0.375 inches -
Fastener Length
0.375 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.292 inches and 0.332 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
36 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 -
Screw Material Specification
66 federal standard all material responses -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-062-6005 MPN 83216-112DFilm Fixed Resistor
- 5935-01-085-3279 MPN 036-000495-003Tip Jack
- 5975-01-372-6685 MPN 076-006367-002Electrical Tiedown Mounting Base
- 5985-01-420-9692 MPN 057-000762-004Antenna
- 5945-01-477-1805 MPN A31U29706-1Vxi Form C
- 5940-01-529-0757 MPN 011-004109-001Lug Terminal
- 5950-00-645-6060 MPN 3007-2-3Radio Frequency Coil
- 5940-00-949-3157 MPN 2162-006-03Terminal Board
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-774-9584 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN510C8-6 | Zf Industrieantriebe Witten Gmbh |
MS51960-45 | Military Standards |
003-007861-045 | Northrop Grumman Systems Corporation |