NSN 5305-00-776-7690
Bolt Stove
1.125 inches fastener length, fillister head style, between 0.208 inches and 0.226 inches head diameter, head height: between 0.086 inches and 0.096 inches .
Manufacturer part number 7767690 for national stock number 5305007767690.
Datasheet
-
Product description
Machine Screw NSN 5305-00-776-7690.
-
MPN or Model
7767690
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.500 inches -
Fastener Length
1.125 inches -
Head Style
Fillister -
Head Diameter
Between 0.208 inches and 0.226 inches -
Head Height
Between 0.086 inches and 0.096 inches -
Hole Diameter
0.055 inches -
Internal Drive Style
Slot -
Thread Diameter
0.138 inches -
Hole Quantity
1 -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
60000 pounds per square inch -
Screw Material
Steel -
Screw Material Specification
Qq-s-633 federal specification single material response -
Head Hole Configuration Style
Round -
Thread Series Designator
Unc -
Nondefinitive Specification/std Data
1 type and 5s style -
Departure From Cited Designator
As modified by fastener length
More from these suppliers
- 5935-01-054-0315 MPN 11672304-1Electrical Connector Cable Clamp
- 5930-01-182-7486 MPN 1233236-2Pressure Switch
- 4820-01-306-3024 MPN 8331400Valve Seat
- 5935-01-328-2746 MPN 12361689-5Electrical Receptacle Connector
- 5935-01-435-3283 MPN RCSK15067Electrical Receptacle Connector
- 5930-01-470-6015 MPN 12419189Pressure Switch
- 5975-01-496-8684 MPN 12383955Electrical Equipment Shelf
- 5985-01-587-7987 MPN 12498021Antenna Support Base
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-776-7690 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7767690 | U S Army Tank Automotive Command |
6701231 | General Motors Corp |
6701231 | Allison Transmission, Inc. |