NSN 5305-00-802-0570
High Torque Screw
Between 1.011 inches and 1.058 inches fastener length, modified pan head style, between 0.361 inches and 0.381 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number 51B221-12 for national stock number 5305008020570.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-802-0570.
-
MPN or Model
51B221-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 1.011 inches and 1.058 inches -
Head Style
Modified pan -
Head Diameter
Between 0.361 inches and 0.381 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.735 inches and 0.765 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-070-6450 MPN 7-10410-1Aircraft Access Cover
- 1560-00-139-0867 MPN 14-11883-3Aircraft Access Cover
- 1560-00-163-8392 MPN 14-31602-1Aircraft Tip
- 1560-00-777-4436 MPN 2-73240-1Rubber Pedal Guide
- 1560-00-799-4182 MPN 2-11844-9Aircraft Access Door
- 1560-00-857-7684 MPN 3-50347-1Engine Turbine Shroud
- 1560-00-859-7215 MPN 3-11881-29Aircraft Access Door
- 1560-00-869-9849 MPN 6-52420-27Tail Cone Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-802-0570 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B221-12 | Northrop Grumman Technical Services, |
51B221-12 | Northrop Grumman Systems Corporation |
51B221-12 | Northrop Grumman Systems Corporation |