NSN 5305-00-806-0218
Tap Bolt
0.875 inches fastener length, hexagon head style, between 0.226 inches and 0.243 inches head height, width between flats: between 0.551 inches and 0.562 inches .
Manufacturer part number MS35292-59 for national stock number 5305008060218.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-806-0218.
-
MPN or Model
MS35292-59
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.875 inches -
Fastener Length
0.875 inches -
Head Style
Hexagon -
Head Height
Between 0.226 inches and 0.243 inches -
Width Between Flats
Between 0.551 inches and 0.562 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
69000 pounds per square inch -
Hardness Rating
100.0 rockwell b -
Material
Steel -
Surface Treatment
Cadmium and chromate or zinc and chromate -
Thread Series Designator
Unf -
Nondefinitive Specification/std Data
2 type and 10p style
More from these suppliers
- 5905-00-021-2352 MPN 10179933Film Fixed Resistor
- 5940-00-052-9174 MPN 9157481Terminal Board
- 5930-00-188-5579 MPN 10243779Rotary Switch
- 5935-00-204-8389 MPN 8169022Electrical Plug Connector
- 1560-00-285-6637 MPN 10173081Con Cockpit Support
- 5905-00-324-6368 MPN 8107468Nonprecision Nonwire Wound Variable Resistor
- 4820-00-449-0715 MPN 10292943-2Safety Relief Valve
- 5985-00-453-5554 MPN 7913127-1Radio Frequency Reflection Isolator
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-806-0218 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35292-59 | Military Standards |
120758 | U S Army Aviation And Missile |
120758 | Diamond Reo Truck Co |