NSN 5305-00-808-7663
High Torque Screw
Between 1.175 inches and 1.222 inches fastener length, flat countersunk head style, between 0.451 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 51B334-14 for national stock number 5305008087663.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-808-7663.
-
MPN or Model
51B334-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.290 inches and 0.357 inches -
Fastener Length
Between 1.175 inches and 1.222 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.451 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-100-8791 MPN BACB30LU3-48Close Tolerance Screw
- 5305-01-196-5092 MPN LE111-0038-2407Close Tolerance Screw
- 5305-01-417-2497 MPN TX1027D4-16AClose Tolerance Screw
- 5305-01-451-3491 MPN C7985-3D9RShoulder Screw
- 5305-01-479-2544 MPN 3M1262V4D13-5AClose Tolerance Screw
- 5305-01-513-9071 MPN TX1027C5-11AClose Tolerance Screw
- 5306-00-413-6258 MPN AIC485-1Internal Wrenching Bolt
- 5306-00-596-7415 MPN AIC752-8D73Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-808-7663 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B334-14 | Northrop Grumman Systems Corporation |
51B334-14 | Sps Technologies, Llc |
51B334-14 | Arconic Global Fasteners & Rings, |
51B334-14 | Huck International, Inc. |
51B334-14 | Sps Technologies, Llc |
51B334-14 | Hi-shear Corporation |
51B334-14 | Sps Technologies, Llc |
51B334-14 | Alcoa Global Fasteners, Inc. |
51B334-14 | Lisi Aerospace Canada Corp |